Transportable weighbridge DIY-1000

Transportable weighbridge with pre-mounted load cells and steel ramps & foundation (option) for temporary sites.

    Image folder specified does not exist!
  •  

Features

  • Application: relocatable steel truck weighbridge with optionally ramps and steel foundation for temporary sites
  • Design: steel construction with factory pre-mounted load cells, consist of two parts: The first , is the main body which consists of 1..4 drive modules depending on weighbridge length.Steel foundation can be mounted underneath each module (as an option). The second part, are the side frames which are bolted on each side of the drive modules (yellow painted parts inpictures). These frames work also as guide rails avoiding trucks driving out of the weighbridge. Factory pre-mounted load cells come as standard equipment of the scale. Installation
    time on site is reduced in half a day (all load cells have two direction bumpers. Top
    access to load cells and junction box is possible for easy maintenance and service.
  • Maximum capacity: 30t...80t
  • Platform lenght: 6m...24m
  • Platform width: 3m
  • Platform height: 360mm (combined with existing concrete foundation), 375mm (combined with SF15 steel base), 500mm (combined with SF140 steel base)
  • Platform gap width: 1m
  • Maximum axle load: 10t ( DIN 8119 )
  • Loadcells: 4...10 pcs. loadcells, stainless steel IP68 hermetic sealing
  • Base requirements: -smooth concrete surface, asphalt or compacted earth

Models


Options

  • Pre-mounted, pre-fabricated steel foundation model SF15 and SF140
  • Portable steel ramps
  • Galvanized version